Intake Process: As the rotors rotate, the inter-tooth volume formed by the main and auxiliary rotors gradually expands. This volume is only connected to the intake port, and outside air is drawn into it. When the inter-tooth volume reaches its maximum, it disconnects from the intake port, ending the intake process. This is the "intake process."
Sealing and Conveying Process: At the end of the intake process, the peaks of the main and auxiliary rotor teeth seal against the housing, trapping the air within the inter-tooth volume in a closed cavity formed by the main and auxiliary rotors and the housing. This is the "sealing process." As the two rotors continue to rotate, the teeth of the main and auxiliary rotors mesh, and the meshing surfaces gradually move towards the exhaust end, transporting the air within the inter-tooth volume towards the exhaust end. This is the "conveying process."
Exhaust Process: When the rotors rotate to the point where the inter-tooth volume connects with the exhaust port of the housing, the compressed gas begins to be discharged. This process continues until the profiles at the tooth ends are fully engaged. At this point, the inter-tooth volume is zero, and the gas is completely discharged, completing the "exhaust process."


