Impeller blades designed based on three-dimensional flow theory are generally spatial curved surfaces. The machining and forming of the blades and impeller are the key and challenging aspects of manufacturing. For three-dimensional impellers, there are two main common machining methods:
1. Three-body welding
This means the impeller disc, blades, and cover are machined separately. This method requires relatively simple equipment; the disc and cover only need to be machined to their outlines. Blade machining is more complex. First, a three-coordinate milling machine is used to mill the blade mold. Then, the cut blades undergo heat treatment and are pressed to obtain the desired blade shape. Finally, the blades are welded to the impeller disc, and the cover is welded on. This method requires a three-coordinate milling machine, a heat treatment furnace, a hydraulic press, and other conventional equipment. The investment is relatively low, making it more suitable for beginners.
2. Integral milling
This means the impeller disc and blades are milled together using a multi-coordinate milling machine to obtain a semi-open impeller. To avoid interference, this type of impeller is mostly machined using a five-coordinate machining center.


