The temperature range in refrigeration is broad, including evaporation temperature (te), suction temperature (ts), condensation temperature (tc), and discharge temperature (td). The evaporation temperature (te) and condensation temperature (tc) play a decisive role in the operating conditions of a refrigeration system.
1. Evaporation Temperature (te): The temperature at which the liquid refrigerant boils and vaporizes in the evaporator. te cannot be directly measured; it is obtained by measuring the corresponding evaporation pressure.
2. Condensation Temperature (tc): The temperature at which the superheated refrigerant vapor condenses into a liquid in the condenser after releasing heat. The condensation temperature cannot be directly measured. It is obtained by measuring the corresponding condensation pressure. A higher condensation temperature corresponds to a higher condensation pressure. Excessively high condensation temperatures result in heavy unit load, motor overload, and unfavorable operation, leading to a decrease in cooling capacity and an increase in power consumption.
3. Discharge Temperature (td): The temperature at the discharge port (including the temperature of the discharge port connector). Measuring the discharge temperature requires a temperature measuring device, which is generally not provided for small units. Temporary measurements can be taken with a semiconductor thermometer, but the error is relatively large. Exhaust temperature is affected by suction temperature and condensing temperature. An increase in suction or condensing temperature will lead to a corresponding increase in exhaust temperature. Therefore, controlling both suction and condensing temperatures is crucial for stabilizing the exhaust temperature.
4. Suction Temperature ts: This refers to the gas temperature at the suction connection pipe. A temperature measuring device is required to detect the suction temperature, but small units generally do not have one. During testing and debugging, it is usually estimated by touch. For air conditioning units, the suction temperature should ideally be controlled to around ts = 15℃. Exceeding this value will negatively impact cooling performance.


